How configure BSNL DSL router?

By Lexie Tanner 4 years ago

How configure BSNL DSL router?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How do I use my Dlink 2750U as a wireless router?

:: WAN Configuration ::

  1. Connect the ISP provided broadband Ethernet jack into the Lan4 port of your router.
  2. Input the WAN IP Settings that are provided by your ISP for your connection.
  3. Now click Apply and the router should be connected to the internet successfully.

How do I configure my ADSL modem as a router?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I setup a Dlink wireless router as an access point?

How to change a D-Link router to AP mode

  1. Connect a computer to the D-link router and launch a web browser.
  2. Visit the following router configuration page: http://192.168.0.1.
  3. You are prompted to enter a username and password.
  4. Click Setup > Local Network.
  5. Set the DHCP Mode to Off.
  6. Click Apply Changes.

Is the Dlink 2730u compatible with WiFi?

Dlink 2730U / 2750U are WiFi enabled ADSL2+ compliant Broadband modems with 4 LAN ports and 1 ADSL port.Before getting started with the configuration you need to connect it properly on your broadband line.For reference you may check our post – How to connect an ADSL Broadband Modem. 1.

How to set SSID to Dlink for WiFi?

Here, we have set SSID: Dlink, which means our WiFi would show up in the WiFi enabled devices as Dlink. In Max Clients, enter the maximum no. of devices you wish to connect to your WiFi. Save the settings. 2. Next in the left navigation menu, click on Security under Wireless. Set WPS to Disabled.

Why does my D-Link ADSL modem not work?

Many modems fail mainly due to power fluctuation, lightning, and overheat. You can buy a variety of modems from flipkart,snapdeal and ebay. But it is then you will regret that you didnt learn to configure it, and wait for the service person to reach your home

How to name your wireless network in D-Link?

Click on “Wireless” in the left hand side menu and you will see this page : As shown in the above page you need to check Enable wireless field right at the top. For the field that says”SSID” you can name it anything. It will be the name of your wireless network and will help you identify which network is yours so name it Dlink or anything really.