What size should a disabled toilet be?

Document M (Doc M) of the UK building regulations states that wheelchair users should be able to comfortably approach, transfer to and use the sanitary facilities provided. The recommended dimensions of a disabled toilet room are; at least 2200mm deep x 1500 wide.

What is the height of a disabled toilet pan?

Accessible toilets can meet compliance when they have a height between 440 and 500mm. Most commonly, they will have a height of 450mm, which is based off of the height of the average adult user. The toilet also needs to have added projection to the front, or have a more elongated front or pan.

What are the legal requirements for a disabled toilet?

Doors must open outwards and be at least 900mm wide to allow for easy wheelchair access. These doorways needn’t be any higher than a standard door (900mm is also a standard width). Due to requiring space for a wheelchair, accessible toilets need more floor space (1500mm x 2200mm).

What is the minimum size for a disabled bathroom?

Building regulations outlined in the government’s Document M state the minimum dimensions for an accessible wetroom are 2500mm x 2400mm. These regulations are for a wetroom that includes a toilet, basin and shower. The document also recommends that the size of the shower tray be a minimum of 1000mm x 1000mm.

What is the minimum size for a disabled toilet UK?

2200mm
Disabled toilets must be housed in a room that is at least 2200mm in length and 1500mm in width. Larger dimensions are acceptible though key fittings and amenities must still be located correctly.

What is the minimum width of a disabled toilet door?

Wheelchair Accessible Toilet Cubicles The disabled toilet dimensions have recently been restructured in order to accommodate a cubicle length of 2220mm, as opposed to its previous measurement of 2000mm. The outward opening door needs to be 950mm wide and have a 900mm opening.

What is the highest handicap toilet?

Highline™ Tall Two-piece elongated 1.28 gpf tall height toilet. The Highline® Tall is Kohler’s tallest toilet – a full 2″ taller than Comfort Height® toilets to provide ultimate accessibility and ease of use.

What height is a comfort toilet?

between 17 and 19 inches
How High is a Comfort Height Toilet? Comfort height toilets vary in height. By and large, the seat tends to stand between 17 and 19 inches from the ground (43cm to 48cm). In contrast, a standard traditional height toilet stands at around 15 inches (38cm).

Does a disabled toilet need a lid?

There should be no lid on the WC seat. This will interfere with the use of the back pad. The toilet paper, wash basin, soap dispenser and towel/hand drier should be within easy reach of a user sitting on the toilet. The wash basin should have a lever-operated mixer tap on the side closer to the WC.

Does a disabled toilet need an alarm?

The BS8300:2009 standard requires that all new disabled WC installations are fitted with an emergency assistance alarm.

How wide does a disabled door need to be?

Ideally, the door opening should be 900mm wide for a wheelchair user. Any obstruction such as a radiator should not be placed opposite or close to the doorway. The corridor should not be reduced below a minimum width of 750mm and is ideally 900mm for a wheelchair user.

What is the minimum width of a door for wheelchair accessibility?

32 inches
Doorways, as required by the Americans with Disabilities Act (ADA) accessibility standard, should have a clear width of 32 inches from the door’s face to the opposite stop.

What are the required dimensions for a disabled toilet?

Disabled toilets must be housed in a room that is at least 2200mm in length and 1500mm in width. Larger dimensions are acceptible though key fittings and amenities must still be located correctly.

Do you need a disabled toilet in the UK?

According to Document M (Doc M) of the UK building regulations, wheelchair users should be able to comfortably approach, transfer to and use the sanitary facilities provided within a building. In order to meet building regulations, a disabled toilet requires: A raised height WC with extra projection for wheelchair transfers.

What are the dimensions of a wall hung toilet?

With integrated and concealed wall-hung installation details, wall hung square toilets have crisp and well defined edges for a compact and minimal look. The Swiss Madison Concorde Wall Hung Toilet has a width of 14.1875” (36 cm), depth of 22.4375” (57 cm), and is hung at an overall height between 16-20” (40.6-50.8 cm).

How big should the clearance be around a toilet?

Clearances around toilets and water closets (WCs) can be measured from the face of the fixture or from its center line and are used to best service the toilet user. Minimum clearances between the face of the toilet fixture and the wall or nearest obstruction element are at least 24” (61 cm)* but are recommended to be 36” (91 cm).