Can mantle be wider than hearth?

Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.

How far should a fireplace mantel extend?

A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that. Do not guess when sizing the mantel to a room, or the mantel could wind up being too long or too short.

How far should mantle be from hearth?

about 12 inches
As a general rule, a mantel is placed about 12 inches above the fireplace opening. Add an inch to the distance for every inch that the mantel protrudes. So, a mantel 6 inches deep would be attached 18 inches above the firebox opening.

What is a raised hearth fireplace?

Raised hearths or sitting-height hearths are built off the floor, usually no more than 17 inches up. They do take up floor space, but they allow for friends and family to sit more comfortably near the fire. Raised hearths are harder for kids and pets to access.

How wide should mantle be?

The recommended width for a mantel is 6 inches (15.24cm) wider on both sides. So, if your fireplace is 36 inches (91.44cm), your mantle should be at least 48 inches (121.92cm) wide. Whether you want to install pilasters or not, you’ll need to have the same width for your fireplace mantle.

Should mantel be wider than TV?

For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace. Having more space beyond the TV edges can sometimes make the TV look too small for the wall it is on.

How far should combustibles be from fireplace openings?

six inches
The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening.

How high is too high for a mantel?

A mantel that is at least 12 inches above the opening of the fireplace should be high enough away from the flames to keep you, your family, and your house safe.

How much clearance do you need around a fireplace?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

Does a hearth have to be raised?

If you have any solid fuel burning stove, it is absolutely vital that you have the correct hearth for it to sit on. For this reason, regulations also state your hearth should be ‘visually apparent’, with the edge ideally raised above the level of the floor.

How wide should fireplace surround be?

Generally, your total facing width should be a minimum of 1″ wider than the distance between your mantel legs (C) and your facing height (facing leg height + facing header width) to be a minimum of ½” taller thanyour inside mantel height (B). Find the Slate Color and Size combination that meets your needs.

What is mantle vs hearth?

As nouns the difference between mantle and hearth. is that mantle is a piece of clothing somewhat like an open robe or cloak, especially that worn by orthodox bishops while hearth is a brick, stone or cement floor to a fireplace or oven.

What material to use for a hearth base?

Slate is another great natural stone to be used as a material for a fireplace hearth. It provides a more rustic look over other types of hearth material, but is also more prone to staining and requires more regular and rigorous cleaning to keep it looking good.

What type of stone is used for a hearth?

Marble is a natural stone for elongated hearths, providing a smooth surface and subtle sheen to the hearth. Granite, soapstone and quartz can also be used for the top surface of seating hearths, even if other materials — like brick or field stone — make up the lower hearth portions.

How do you make a fireplace surround?

1. Build the pillars for the fireplace surround out of MDF. Begin by cutting the front and sides for the pillars out of 3/4″ MDF. Drill pocket holes on the back side of the front piece and connect the sides with 1-1/4″ pocket screws and glue. Cut 3 inner pillar supports per pillar out of 1×3 furring strips.