Can I use my phone as a remote for my projector?

By Lexie Tanner 4 years ago

Can I use my phone as a remote for my projector?

Universal Projector Remote Control for Android This Remote Control for Projector devices contains many Projector Remotes, some of them are the following. Start Using your Android Phone as a Remote now. You only need built in IR Blaster in your phone to transmit IR Signals to your Devices.

How do I use my Sanyo projector?

Equipment Instructions – Sanyo and Panasonic projectors

  1. Point the remote at the projector on the ceiling and press the power button.
  2. Press the button marked “input” to change the source.
  3. Turn on the audio amp and select Video as the input.
  4. Insert the video tape or DVD into the player.

How much is a Sanyo projector?

SANYO PROJECTOR

Review MRSP
Sanyo PLV-Z60 720p 3LCD Home Theater Projector Review: Overview Full Specs $1295
Sanyo PLC-XL51 Ultra-Short Throw Projector Review Full Specs $3995
Sanyo PLC-XL50, XGA Ultra-Short Throw Business Projector Review Full Specs $3295
Sanyo PLV-Z2000 Home Theater Projector Review Full Specs $2495

How can I control my projector from my phone?

Use with Models Supporting [SIMPLE] Network Connection

  1. 1) Turn the projector ON.
  2. 2) Configure the projector’s local wireless network settings. Display the on-screen menu.
  3. 3) Join the local wireless network from your Android device. On your Android device,
  4. 4) Launch the application, then search for the projector.

How do I connect projector to projector remote?

Pairing the Projector Remote Control

  1. Turn on the projector.
  2. Press and hold the home and Enter buttons on the projector remote control until the command light on the remote control starts blinking. A message appears on the screen when the projector remote control is paired.

How do I turn on my projector?

Turning On the Projector

  1. Remove the projector’s lens cover.
  2. Connect the power cord to the projector’s power inlet.
  3. Plug the power cord into an electrical outlet. The projector’s power light turns orange.
  4. Press the power button on the projector or the remote control to turn on the projector.

How do I rotate my Sanyo projector screen?

Hold down the A/V Mute button on the remote control for five seconds. The image disappears briefly and reappears flipped top-to-bottom. On the remote control select Menu -> Extended and press Enter. Use the up/down arrows to get to Projection and change it to Front/Ceiling.

Does Sanyo make projectors?

The last production date for Sanyo projectors was March 2012. Based on the Panasonic policy referenced above, Panasonic will stop service repair support for Sanyo projectors on December 31, 2020.

How do I change the bulb in my Sanyo projector?

Replacing the Lamp

  1. Unplug the projector and allow it to sit unplugged for at least 45 minutes.
  2. Flip the projector over so that its bottom panel is facing up and towards you.
  3. Use your Phillips screwdriver to loosen the screw that secures the projector’s lamp cover.