How do you fix strike the f1 key to continue F2 to run the setup utility?

By Lexie Tanner 4 years ago

How do you fix strike the f1 key to continue F2 to run the setup utility?

Resolution

  1. Press the “F2” key to enter system setup.
  2. Arrow down to “F1/F2 Prompt on Error”
  3. Select “Disable”
  4. Press
  5. Select “Exit and Save Changes” and press

How do I get rid of press F2 to continue?

On the System Setup Main Menu screen, click System BIOS. On the System BIOS screen, click Miscellaneous Settings. Change F1/F2 Prompt on Error to the preferred status. Leave the System Settings and restart the server.

How do I get out of CMOS setup utility?

You normally press F10 Save and Exit to get out of BIOS and proceed to booting into Windows. Cheers.

How do I disable F1 F2 prompt on error?

Why do I have to press F2 to start my computer?

If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.

How do I disable Press F1 to continue when booting?

How to disable the F1 key issue at Windows startup?

  1. Go to your BIOS and load default settings.
  2. If you don’t have a floppy drive then disable the Floppy Mode option in BIOS.
  3. Look for the option “Halt On” and set it to “No Error”.
  4. Save the settings and exit from BIOS.

How do I get to BIOS setup utility in Windows 10?

The standard method for entering the BIOS Setup Utility is to tap a specific function key while the computer is booting. The required key is either F1 or F2, depending on the model of machine. Certain systems also require holding down the Fn key while tapping the F1 or F2 key.

How do I enter BIOS on Windows 10?

To enter BIOS from Windows 10

  1. Click –> Settings or click New notifications.
  2. Click Update & security.
  3. Click Recovery, then Restart now.
  4. The Options menu will be seen after executing the above procedures.
  5. Select Advanced options.
  6. Click UEFI Firmware Settings.
  7. Choose Restart.
  8. This displays the BIOS setup utility interface.

How do I escape the boot menu?

Turn on the laptop (or CTRL-ALT-DEL if you are already stuck on the boot menu) Hold down F2 (or whatever your BIOS menu key is) Go to the Security Menu and disable Secure Boot. Save and Exit.

Why can’t I exit my BIOS?

If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. If BIOS isn’t properly configured, you might experience this problem. Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC.