How do you work a box vape?

The box mod works in a similar fashion to other vaporizers by using a battery. It has a battery inside of it that heats up a coil. The coil is located inside of a separate atomizer that is attached to the box mod. When this coil is heated, vapor is created that the user then inhales.

How do I load my vape?

Saturate the coil with several drops of e-liquid by using a dropper to put a drop of e-liquid inside each hole. Replace the coil and attach your atomiser back to the tank. Next, unscrew the top of the tank to add your e-liquid. Most e-liquids come with a dropper to make adding e-liquids quick and simple.

How do you change vape liquid?

First, you need to unscrew your tank from the battery and take out the old e-liquid. Don’t forget to detach the tank from the atomiser or coil head as well. Next, remove any gunk that may have formed on the sides of the tank (this is particularly common with sub ohm tanks that use VG-heavy e-liquids).

How do you start a box mod?

Turn the Box Mod On – Almost all box mods turn on in the same way. You simply click the main button (the fire button) five times fast. When done properly, the device’s LED screen will light up, indicating it is on. You can perform these five clicks again to turn the power off.

When should you refill your vape tank?

You’ll know it’s time to refill when you start to notice a weaker flavour or less vapour being produced when you inhale. Closed systems are probably the easiest vape systems to refill as all you need to do is unscrew the tank from your rechargeable device and screw on a new, pre-filled tank.

Can you change vape juice without changing the coil?

Your vape coil head is likely to outlive your devotion to one particular flavor. However, if you simply empty and refill your tank, e-liquid residue will stick around and cause a lingering flavor. Good news: You don’t have to change coils when changing flavors.

How do you fill a vape with liquid?

Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.

How do you load concentrate in a vape pen?

Step 1) Prepare your concentrate for loading by gathering a small amount on the end of a dab tool. With most pens you’ll want to load a BB-sized amount at a time, or approximately 0.1g. Depending on the consistency of your extract and the depth of your coil you might even be able to put a little on the tip of your finger to load it.

Can you load a vape chamber with fingers?

Loading your chamber by picking up your wax with your fingers is a big no-no. It can actually degrade the oil. Instead, collect a small amount from the container with the dab tool or dabber and place it into the chamber.

Do you need an airtight container for a vape pen?

Like with any tool, there are certain accessories that are a must. While your vape pen is easily portable, it is also very fragile, particularly if you are using pre-filled oil cartridges. If you are using wax or smoking dabs, you’ll need a small airtight container to store them in.