How fast is surfboard SBG6580?

How fast is surfboard SBG6580?

343 Mbps
With download speeds up to 343 Mbps and Wi-Fi speeds up to 300 Mbps, it’s the perfect choice for the low-bandwidth home network!

How do I bridge my Motorola SBG6580?

Motorola SBG6580

  1. Open a web browser (Internet Explorer, Firefox, Safari, Chrome, etc.)
  2. In the address bar, type: 192.168. 0.1 [Then press the Enter Key]
  3. Enter Username*: admin.
  4. Enter Password*: motorola.
  5. Click Login.
  6. Under the Basic section, click Setup.
  7. Set the Primary Network Only Mode drop-down to Bridged.
  8. Click Apply.

What is default password for Motorola SBG6580?

admin
When attempting to access the SBG6580 configuration menu, the gateway prompts for a username and password. By default, the username is admin, and the password is motorola.

How do I setup my Motorola Surfboard SBG6580?

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box. NOTE: By default the LAN IP address is 192.168. 0.1….Configuration

  1. Enter admin in the Username field.
  2. Enter motorola in the Password field.
  3. Click the Login button.
  4. Click the Wireless link on the top menu.

How do I put my Motorola in bridge mode?

So, in full:

  1. Unplug coax cable from Motorola.
  2. Hold down the white reset button on the back panel with a pen for 30s.
  3. When modem is back on plug in a computer with an Ethernet cable into the modem.
  4. Now you will make some changes:
  5. Plug the coaxial cable back into the modem and power cycle it.

How do I reset my Motorola SBG6580 password?

Factory Reset in the Web Interface

  1. Enter admin in the Username field.
  2. Enter motorola in the Password field.
  3. Click the Login button.
  4. Click the Security link on the left hand column, the Status Security page appears.
  5. Restore Factory Default – Select Yes, to factory default the gateway.

How do I reset my Motorola SURFboard SBG6580?

Factory Reset With The Reset Switch

  1. Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it.
  2. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds.