How many cc is a Husqvarna 353?

How many cc is a Husqvarna 353?

Husqvarna 353 20 inch 51.7cc Chainsaw.

Is a Husqvarna 353 a pro saw?

Husqvarna 353 is professional saw with high capacity across a wide rpm range. The wide power band makes this saw exceptionally versatile. Smart Start® and fuel pump for easy starting.

How many horsepower is a Husqvarna 365?

4.9 hp
Husqvarna Chain Saw Specs

Model Cylinder Displacement Power Output
460 60.3 cc 3.6 hp
550XP 50.1 c 3.7 hp
555 59.8 cc 4.3 hp
365 70.7 cc 4.9 hp

How many cc is a Husqvarna 350?

Husqvarna 350 Chainsaw Specifications

Model Name Husqvarna 350
Engine Type single-cylinder two-stroke
Engine Capacity 45.0cc /
Cylinder Bore 42mm / 1.65in
Piston Stroke 32mm / 1.28in

What is the difference between a Husqvarna 365 and 372?

The difference between a 365 Special and a 372XP is the 48mm bore versus a 50mm bore. Though I have seen some Zama carbs in a couple 365’s. The difference between a 365XP X-torq and a 372XP X-torq are the transfer cover plates on the side of the cylinder.

Do they still make Husqvarna 365?

So yes, 365 is still made, but not like the old 365 special. Same displacement as the 372xp, less power, but can be remedied.

What saw replaced the Husqvarna 350?

A- The 350 was replaced by the 450. The 445 replaced the 345.

What size is a Husqvarna 350?

Husqvarna FE 350 Engine and Transmission Technical Data
Engine details
Fuel system Carburettor
Engine size – Displacement – Engine capacity 349.70 ccm (21.34 cubic inches)
Bore x Stroke 88.0 x 57.5 mm (3.5 x 2.3 inches)

Is the Husqvarna 353 a good chainsaw?

HUSQVARNA 353. Husqvarna 353 is professional saw with high capacity across a wide rpm range. Its high-power, low weight, slim body and high centre of gravity make it both powerful and easy to use. The wide power band makes this saw exceptionally versatile.

How often should I Clean my Husqvarna 353 chain saw?

In order to maximize the performance of your Husqvarna 353, always clean the saw before use; and make sure that the chain is sharp and tight. Also, remember to press the decompression button on the side before starting the chain saw. It will usually start with one pull; however, it might need four or five pulls on a cold day.

Are there any disadvantages to using a Husqvarna chainsaw?

The only disadvantage of the Husqvarna 353 is that it isn’t very suitable for tall people. This is because you cannot run it on a longer bar or chain. This would entail a lot of bending over for larger people and could prove to be rather uncomfortable. Otherwise, it is a wonderful chain saw to own.

How big of a bar do you need for Husqvarna chainsaw?

A great piece of equipment to have around the house as it can easily tackle a variety of chores. According to customer feedback, the Husqvarna 353 is best employed with an 18″ bar.