Is a GTS a Commodore?

Is a GTS a Commodore?

The Holden Special Vehicles (HSV) GTS has represented the pinnacle of sporting Holden Commodores since 1987, when the Melbourne-based company was nominated as Holden’s official tuning house. Debuting in 1992 with the VP GTS, the nameplate was reserved for only the most powerful HSVs.

How much HP does a VF GTS have?

Powertrain specs

Engine type LSA V8 Supercharged, DOHC, 16v
Displacement 6.2 l (376 ci / 6162 cc)
Power 588 ps (580 bhp / 433 kw) @ 6100 rpm
Torque 740 Nm (546 lb-ft) @ 3800 rpm
Power / liter 95 ps (94 hp)

How much is a Holden GTS?

The HSV GTS is available from $55,400 to $74,030 for the 2017 Sedan across a range of models.

How long is a VF GTS?

4943mm to 5040mm
The height, measured from the ground to the top of the car, ranges from 1467mm to 1480mm depending on the variant. The width is 1899mm across all variants. The length ranges from 4943mm to 5040mm.

What does Holden GTS stand for?

top performance model
GTS (top performance model) Senator Signature (entry luxury model based on Calais) Senator Signature wagon. Grange (top luxury model based on Caprice) Maloo (VS series based utility)

What does GTS stand for in cars?

Gran Turismo Sport
Simply put, the three letters GTS stand for “Gran Turismo Sport.” But you want to know more than that, right? You want to know what it actually means and where it came from.

How many kW is a VF GTS?

The Gen-F GTS features a 6.2 L; 376.0 cu in (6,162 cc) supercharged LSA V8 engine which provides 430 kW (585 PS; 577 bhp) of power and 740 N⋅m (546 lbf⋅ft) of torque.

What does GTS mean Holden?

GTS (top performance model) Senator Signature (entry luxury model based on Calais) Senator Signature wagon. Grange (top luxury model based on Caprice) Maloo (VS series based utility)

How many VF GTS were built?

After 25 years, 12,012 units of various GTSs were built, with the last series of GTS being the most powerful by far.

What are the specs of a 2013 Holden HSV?

6) (VF) specs HSV GTS (man. manufactured by Holden HSV in AUS 4-door sedan body type RWD (rear-wheel drive), manual 6-speed gearbox gasoline (petrol) engine with displacement: 6162 cm3 / 374.9 cui, advertised power: 430 kW / 577 hp / 585 PS ( ECE ), torque: 740 Nm / 546 lb-ft, more data: 2013 HSV GTS (man.

What’s the difference between the Holden VE and VF?

The VF was an evolution of the VE, with several visual changes. The VF featured new styling at the front and rear, with a more modern, sculpted appearance replacing the VE’s simpler design.

What makes a Holden HSV faster than other Holdens?

Straight from HSV they are quicker than any other model of Holden ever made. At the most basic level the standard engine computer calibration that is in the engine E67 is able to be improved. This results in more power right through the range and better throttle response as well as more torque from low in the rpm.

When is the Holden V-8 being phased out?

But, even though Holden successfully homologated the old V-8 for 2018, the naturally aspirated mill will be phased out starting 2019, when it will be replaced with a race-spec version of the Commodore’s V-6. Continue reading for the full story. The last of the Australian-built Commodore runs a Corvette ZR1 engine!