Is Tattu a good LiPo battery?

Tattu LIPOs are very popular among FPV pilots due to their great build quality and excellent power to weight ratio. I would lie to stand that after 3 years of usage, all my Tattu batteries are in perfect condition, but from 8 packs if only one started to swollen. It is not a bad failure rate.

What does 4S mean on battery?

4 cells
For the 14.8V battery above, that means that there are four cells in series (which means the voltage gets added together). This is sometimes why you will hear people talk about a “4S” battery pack – it means that there are 4 cells in Series.

How many volts is a 4S LiPo?

14.8V
Battery Voltage and Cell Count (S) Each cell in a standard LiPo battery has a nominal voltage of 3.7V. Therefore battery voltage is often referred to as how many cells in the battery (aka “S”). For example, we call a 14.8V battery a “4-cell” or “4S” battery.

Whats the difference between a 3S and a 4S battery?

Obviously, the biggest difference is the voltage delivered to the motors. A 3S Lipo has a nominal voltage of 11.1V or 12.6V when fully charged, while a 4S Lipo has a nominal voltage of 14.8V and 16.8V at full charge. That means the motor spins approximately 28,900 times a minute without any propellers.

What does S mean in batteries?

This is the notation for the configuration of the battery. S means Series, P means Parallel. XsYp means X cells in series (to get the desired voltage) and Y cells in parallel (to get the desired capacity).

What amp should I charge my 4S LiPo?

Most LiPo batteries need to be charged rather slowly, compared to NiMH or NiCd batteries. While we would routinely charge a 3000mAh NiMH battery at four or five amps, a LiPo battery of the same capacity should be charged at no more than three amps.

What is the difference between 3S and 4S LiPo?

Which is better 3S or 4S?

If you use 4s instead of 3s batteries, the voltage is higher and the current is lower, but for the same load, the power is the same. Power = voltage * current, so lower current does not mean lower power.

Can you run 4S on a 3S system?

You can run a motor meant for 4s on 3s no problem. Don’t plug a speed control rated for 3s into a 4s pack.

What is S and P in battery?

Battery packs achieve the desired operating voltage by connecting several cells in series, with each cell adding to the total terminal voltage.

What does 6S mean on a battery?

6S = 6 cells in series x 3.7 V = 22.2 V. You may also see lipos that use a letter “P” to designate voltage. For example, 2S1P or 2S2P. This is not as common with quadcopter batteries but you may see it with LiPo’s meant for other types of RC vehicles. “P” stands for the number of cells in parallel.