Is the AT2050 good?

5.0 out of 5 stars Very nice. The AT2050 is good Microphone, the recording sound quality is perfect. The microphone is heavy duty.

Is the AT2050 better than the AT2035?

For professional recording and live performance, we highly recommend the Audio-Technica AT2050. This versatile multi-pattern mic gives you the option of three different polar pattern settings (Cardioid, Omni, Figure-8) along with the same roll-off and 10 dB switches found on the AT2035.

Which brand is best for mic?

The top 11 best microphone brands you should know and use:

Shure.
Sennheiser.
Neumann.
Rode.
AKG.
Danish Pro Audio (DPA)
Electro-Voice.
Schoeps.

When was the AT2035 released?

The AT2035 Cardioid Condenser Microphone and the AT2050 Multi-Pattern Condenser Microphone will be available August 2008.

Is the AT2020 an XLR mic?

Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Ideal for Project/Home Studio Applications.

What is the difference between AT2020 and AT2035?

In terms of power requirements, there is quite a difference between the AT2035 and the AT2020. Audio Technica AT2020 requires 48V DC at 2mA typical, while AT2035 requires 11-52V at 3.8 mA typical. This is due to the advanced features present on the AT2035.

Is the Audio Technica AT2020 a good mic?

The AT2020 delivers in every aspect that you want a good quality cardiod condenser mic to offer. The vocals are clean, crisp, and very direct. The mic really gives a very airy sound which, added with a preamp or compressor plug-in of choice, is the perfect combination a good vocal is looking for.

Is the at2050 sound good in cardioid mode?

The AT2050 is no exception to this rule, but it’s fair to say that in most instances it will get the job done perfectly well, and it certainly managed to sound more open and airy than it did in cardioid mode when used further from the source.

What kind of filter does the at2050 have?

Unlike the other two mics in this range, the AT2050 has switchable polar patterns: omni, cardioid and figure‑of‑eight, using the expected back‑to‑back capsule arrangement. Like the 2035, it has a switchable 80Hz high‑pass filter and a 10dB pad, and the internal circuitry makes extensive use of surface‑mount components to conserve space.

Is the Audio Technica at2035 the same as the 2050?

The AT2035 and 2050 are almost identical, with the only obvious external distinction (other than the model number on the rear) being the inclusion of a polar‑pattern selector switch on the front of the AT2050 (left).

What’s the difference between the at2020 and at2035?

Self-noise is a respectably low 12dB EIN, equating to a signal‑to‑noise ratio of 82dB at 1kHz at 1Pa — some 8dB lower than that of the AT2020. Structurally and cosmetically, the AT2035 is very similar to the 2020, weighing 403g and measuring 170mm long, with the widest point of the body being 52mm in diameter.