What are the parts of a water cooler?

What are the parts of a water cooler?

The various parts of a water cooler are:

  • Compressor.
  • Motor.
  • Receiver.
  • Condenser.
  • Expansion valve.
  • Evaporator coils surrounding the water tank.
  • Water tank.
  • Cover.

How do I fix my water cooler not cooling?

This is very easy to do: First, remove a few cups of water from your machine, then completely unplug your water cooler from the mains. We then suggest leaving your machine for 24 hours before switching it on again. After 24 hours, plug it back in and wait 6 hours for the water to adjust to a cooler temperature.

How do you change a spigot water cooler?

More videos on YouTube

  1. If you have a hot and cold water cooler turn off the hot tank using the switch on the back of the unit.
  2. Unplug your water cooler.
  3. Remove the water bottle from your dispenser.
  4. Drain the remaining water out through the spigots.
  5. Slowly unscrew the coupling on the broken lever and remove it.

How does a water cooler works?

The water inside the water cooler is fed into a reservoir, where it is cooled using a refrigerant. When the refrigerant is in a gas form and is circulating in the pipes, it has the ability to absorb the heat away from the mineral water in the reservoir, leaving cool and refreshing water that is readily available.

How does a dispenser work?

On the front, a lever or pushbutton dispenses the water into a cup held beneath the spigot. When the water container is empty, it is lifted off the top of the dispenser, and automatically seals to prevent any excess water still in the bottle from leaking.

What causes water dispenser to stop working?

Often times, the water dispenser in your fridge may have stopped working due to a frozen water supply tube. This is a common problem in side-by-side refrigerators in which the tube that connects your water supply to the door where the water dispenser is frozen due to improper temperatures.

Why the water dispenser is not working?

There are three possible sources that may stop your water dispenser from working. The first, and most common reason is that your water tube in the door is frozen. This valve opens the water supply to the dispenser; therefore, if the valve is defective or if the water pressure is too low, the water valve won’t open.

Why is my water cooler not getting cold?

Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

Why is the water in my water cooler not cold?

Check your freon levels if your water cooler is not providing you with cold water any longer. To do a reset, drain a few cups of water out of both the hot and cold sides of the water cooler. Then turn the switches in the back of the cooler off. Unplug your water cooler, and leave it unplugged for 24 hours.

How do I change the Igloo spigot?

Items you will need Purchase a replacement spigot from Igloo, if cleaning or tightening doesn’t work. The standard spigot fits all 1,2,3,5,&10 coolers. Unscrew the gasketnut and remove the old spigot. Place the new spigot through the coooler and screw down the gasket nut.