What do I put on the wall behind my wood burner?

We recommend using porcelain tiles, which are very heat resistant. Most wood burning stoves have insulation blocks in the back and sides to minimise the heat escaping, and there should also be a minimum of 150mm (6 inches) around the back and the side of the stove for ventilation.

What can be used as a heat shield?

All Answers (7) aluminum is the perfect heat shield material offering excellent protection against excessive exhaust system heat. Ultra-high-temperature ceramics,(UHTC), such as zirconium diboride (ZrB2) and hafnium diboride (HfB2) may be of choice.

Do you need wall protection for wood stove?

Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall. When used, however, they, too, should be spaced out from the wall with a gap at the bottom to provide air circulation.

How do I protect my fireplace walls?

Most wall coverings will ignite if the stove is close enough — even drywall, which is fire-resistant. A metal or asbestos barrier, separated from the wall by an inch of air space, provides that protection.

How do you fireproof a wall behind a wood stove?

Bare wood or sheetrock walls around a wood stove are fire hazards. A fire-resistant wall shield is necessary to eliminate the threat of fire. The best wall shields help to radiate the heat from the stove into the room. It is conventional to install wall shields over fire-resistant wall spacers.

Can I use cement board behind my wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

What is the best material to deflect heat?

The metals with the highest thermal conductivity are copper and aluminium. The lowest are steel and bronze. Metals that conduct heat effectively are used in applications where transferring heat is essential, either as part of a cooling or heating process.

What should a wood stove sit on?

Wood stoves need a heat-resistant pad underneath to protect the house from excessive heat and flames. The pad should extend at least 18 inches past all sides of the stove, but check your model to learn whether it requires a larger pad.

Can cement board be used as a heat shield?

Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application. Hardi cement board is also designed to have ceramic, porcelain or stone tiles installed over it to cover and beautify the heat shield after it is installed.

What is the wall behind a fireplace called?

Back (fireback)—The inside, rear wall of the fireplace of masonry or metal that reflects heat into the room.

Is drywall OK behind a wood stove?

Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.

What should I cover the wall behind my wood stove with?

Covering the wall behind a wood stove with a material that acts like a heat shield protects combustible material such as drywall from catching fire. Use foil-covered fiberglass duct board, ceramic tile, sheet metal to protect walls around a wood stove.

Why do you need a wall board for a wood stove?

They provide a shield between the stove and the wall to protect the wall from the high temperature heat output. To install a wall board you should have spacers to install on the wall to keep an open space 1’’ think for air to flow through.

Why is it important to protect floor with wood stove?

Protecting the floor surface under and surrounding your wood stove is very important because of the heat that radiates from the stove and also the potential for hot ember to land on the combustible materials.

What kind of metal to use on Wall for wood burning stove?

Stainless steel is often used, but copper is also an option. Copper, with its gold hue, has a warmer quality than stainless steel. For installation, screw sheets of metal directly into the wall spacers.