What is a NEMA 23 stepper motor?

What is a NEMA 23 stepper motor?

Nema 23 is a stepper motor with a 2.3 x 2.3 inch faceplate. It is suitable for 3d printer, robot arm, cnc machine,etc. In low-speed applications, the stepper motor can be driven at the desired speed without missing a single step. This stepper motor has different torque, the max torque is 3 Nm.

Do stepper motors have gears?

Stepper Motor Gears. Since stepper motors and other control motors are designed to allow accurate positioning, the gearheads used for these motors must provide the same level of accuracy.

How strong is a NEMA 23 stepper motor?

This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque of 19 kg-cm (270 oz-in).

What is the difference between NEMA 23 and NEMA 34?

The decision between NEMA 23 and NEMA 34 motors is primarily a decision about productivity — NEMA 34 motors can remove material at a higher rate using higher feed rates and deeper cut depths. NEMA 34 motors can take deeper passes through material and improve cutting speeds, especially on larger machines.

Does a stepper motor need a gearbox?

Another reason to use a gearbox with a stepper motor is to increase the torque available to drive the load. And stepper motor torque generally decreases rapidly as speed increases, due to detent torque and other losses.

What is a geared stepper motor?

GEARED STEPPER MOTOR Our geared stepper motors are offered in six NEMA frame sizes (from NEMA 8 to NEMA 42) and each NEMA size motor has an integrated stepper motor gearbox with a wide range of gear ratios (from 1:3.7 to 1:369) so as to deliver any desired torque and speed combinations for your applications.

How fast can a NEMA 23 go?

400 rpm
A large stepper motor, this NEMA 23 is strong enough to move large loads that undergo a lot of variation. This stepper can be used with all SlushEngine models. It provides 1.3 N.m of torque and can travel up to 400 rpm. The stepper travel 1.8 degrees per step.

Are stepper motors High torque?

Although stepper motors aren’t notable for their ability to produce high torque at high speed, it is possible, in some applications, to achieve both. The motor’s pull-out torque curve shows the maximum torque that can be produced over the range of operating speeds.