What is the default admin password for sky?

What is the default admin password for sky?

Depending on which hub you have, these are set by default to: Username: admin. Password: sky or the WiFi password on the back of your hub.

How do I access my Sagem router?

Sagemcom Router Login

  1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
  2. Open your web browser of choice and type IP address of your Sagemcom router in the address bar.
  3. Now enter the default username and password of your router by accessing the admin panel.

What is my router admin password?

The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly.

What is the admin sky?

The user name is always admin and the default password on the older hubs is sky (all lower case). With the newer upright hubs the default password is the wifi password on the hub’s label. If you change the wifi password thst will not have changed the admin password which catches a few people out.

Where do I find my Sky router username and password?

How do I log in to my router settings page?

  1. Make sure you’re connected to your home broadband network.
  2. Open your browser and type 192.168.0.1 into your address bar.
  3. When prompted enter the username: admin and password: sky OR, your WIFI password.

How do I log into Optus sagemcom router?

OTHER OPTUS DSL MODEMS/ROUTERS

  1. Your modem must be switched on and connected to your computer (wired or wirelessly)
  2. Open your internet browser and go to this address: http://192.168.8.1.
  3. Enter the default username (if required): admin.
  4. Enter the default password (if required): password.

What is my sky PIN number?

Your Sky TV PIN is a four-digit code used to set parental controls, make purchases and buy rentals, and view PIN-protected shows on your Sky box or Sky Glass. It’s linked to your billing information and parental controls, so it’s important you keep it secure and confidential.

What is the username and password for Sagemcom?

Sagemcom Default Router Login and Password. IP Address: 192.168.254.254. Username: admin. Password: admin. SSID: WIN_XXXX.

How can I Reset my Sky Broadband account?

You just need to hold down the reset button on the back of the Sky Hub for ten seconds, until the power light flashes. By doing a factory reset, you will revert the Sky Hub to its default settings, removing all changes you’ve made and resetting the username to admin and the password to sky For further support, ask the Sky Broadband community.

How can I Reset my Sky Hub to factory settings?

Your router settings page allows you to configure your home broadband network to suit your needs. This includes, how to; If this happens you can easily reset your Sky Hub to factory default settings. You just need to hold down the reset button on the back of the Sky Hub for ten seconds, until the power light flashes.