Why is my Sony DVD player not reading disc?

Verify the disc that you are trying to play is supported by the player. If the disc is dirty with fingerprints or smudges, or if the disc is scratched or broken, the player may not recognize the disc, clean the disc using a soft, dry cloth. Reset the player back to the factory-default specifications.

How do you fix a DVD player that does not read discs?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

What causes a DVD player to say no disc?

No-disc errors are usually caused when the DVD or the laser-lens pickup has become dirty and causes the DVD player to not be able to read the DVD. You may need to upgrade to a newer model, most of which accept the latest DVD formats. Clean the laser lens with a DVD laser lens cleaning disc.

How do I reset my Sony Explorer 400?

How to reset the CD player.

Unplug the power cord of the CD player from the AC wall outlet.
Allow the CD player to set without power for 30 seconds.
Plug the power cord of the CD player back into the AC wall outlet.

Why won’t my DVD player play my DVD?

Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.

How do I reset my Sony 400 CD changer?

Turn off the CD player. Press the ALL CLEAR or CLEAR button, then press and hold down the POWER button on the CD player at the same time. Hold these buttons down until the ALL CLEAR or ALL ERASE message is displayed. Play a CD to confirm the issue is resolved.

How do I reset my Sony DVD player to factory settings?

Follow these steps to perform a factory reset on your Blu-ray Disc™ player:

On the supplied remote control, press the HOME button.
Select Setup.
Select Resetting or icon.
Select Reset to Factory Defaults Settings.
Select All Settings.
Select Start.
Select Close.
Turn off your device, then turn it back on.

Why is my Sony DVD player not playing?

NOTE: Playback issues can also be caused by condensation. If this may be the case, the player should not be used for about an hour to allow to any condensation to dissipate. If the issue is still unresolved, service may be required. Go to Product Repair.

What to do when your CD player won’t play?

If there is a HOLD switch or function available for the player, make sure that the switch or the function is set OFF. Verify the disc that you are trying to play is supported by the player. NOTE: There are some disc players that do not support VCD or DVD discs, as well as not supporting CD-R or CD-RW discs created by a CD burner.

Why does my Narni DVD player not work?

We’ll show you how. Narni, sounds like either a dirty laser or a burned out laser. Try one of the commercially available lens cleaners. If that does not work you may have to disassemble your player and clean/replace the lens assembly.

Why do I get error messages on my DVD player?

If you experience difficulty playing a disc and you receive any of the following error messages, there may be an incorrect setting or there may be a problem with the disc that you are trying to play. IMPORTANT: Not all CD/DVD players are supplied with the same functions and/or features.