How do I get my HP out of error state?

By Lexie Tanner 4 years ago

How do I get my HP out of error state?

What Do You Do if Your HP Printer is in Error State?

  1. Check the Physical Connections to Your Computer. This is among the simplest solutions for an HP OfficeJet printer in error state.
  2. Confirm that Your Printer is Online.
  3. Verify that You Have Loaded Paper into the OfficeJet Printer.
  4. Reinstall the Printer Drivers.

Why is my printer saying error code?

An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. A hardware problem may be the reason the error message persists. Indicating a paper jam, this code can be removed by following the guidance on the printer screen.

What does it mean when your HP printer is in error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

Why is my HP printer giving me an error message?

An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. A hardware problem may be the reason the error message persists. Try resetting the printer initially and reinstall the toner cartridge if the problem persists.

Why is event ID 41 not recorded on my computer?

Event ID 41 is not recorded or the bug check code is zero. This behavior might indicate a power supply problem. If the power to a computer is interrupted, the computer might shut down without generating a Stop error. If it does generate a Stop error, it might not finish writing the error codes to disk.

What should I do if my hp registration is not correct?

SR13 and SR14 paper width sensors connect to DCC on J118. Test the registration assembly motor and clutch. If they do not function correctly, replace the registration assembly. If the error persists, replace the tray lifter assembly.

Is the event ID 41 code in decimal format?

Event ID 41 includes the bug check code in decimal format. Most documentation that describes bug check codes refers to the codes as hexadecimal values instead of decimal values. To convert decimal to hexadecimal, follow these steps: