How do I identify my Gerber toilet?

The model number for Gerber one-piece toilet is located on the back wall inside the tank, near the water line. You will also be able to find cast date and the bar code and serial number (D & S Code). If the toilet is uninstalled: The model number and inspector number are located underneath of the bowl.

What does ErgoHeight mean?

With an ADA Compliant rim height, both comfort and accessibility is ensured. It goes by the name of ErgoHeight, which means that the height of the bowls rim without a seat falls just short of seventeen inches.

Does fluidmaster work on Gerber?

A standard Fluidmaster flush valve for 2″ should work. The 1985 toilets were 3.5 gallons. The fluidmaster kit comes with an adjustable flapper that lets you dial it up or down. You should be able to get the thicker Gerber gasket at the hardware store too.

What size flapper does a Gerber toilet use?

3 Inch Toilet Flappers Replacement for Gerber 99-788, Water Saving, High Performance Toliet Flapper, Easy to Install – Blue.

How do you fix a Gerber toilet that keeps running?

Check the hose’s filter screen for debris, then remove the screen and rinse it thoroughly to clear away buildup or residue before reconnecting the hose and turning the water supply back on. This process helps remedy weak flushes or constant running in Flushmate-equipped Gerber toilets.

How tall is Ergoheight toilet?

It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet. There are a few drawbacks to this raised toilet.

Are rimless toilets better?

Not only are rimless toilets easier to clean, they’re also more hygienic than regular toilets. The direct flush technique used by most rimless toilets shoots water around the whole of the bowl, which cleans the pan much more effectively than a regular toilet. This means your toilet will stay cleaner after every flush.

How do I know if I have a 2 inch or 3 inch toilet flapper?

Look at the flush valve drain opening at the bottom of your tank.

If the opening looks about the size of a baseball or orange, you need a 2″ flapper.
If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.

What kind of GPF does a Maxwell toilet have?

The Maxwell® toilet is designed with high-quality components such as 3″ flush valve, dual siphon jet and more. This Maxwell® two-piece toilet operates at a WaterSense certified 1.28 gpf (4.8 Lpf) and offers the ultimate in comfort with a 16-3/8″ ADA compliant ErgoHeight™ design.

What does it mean when toilet seat will fit?

A. “Will fit” is a term used to describe parts (including toilet seats) that are not made by the original manufacturer, but that are designed to fulfill the same function and fit the same way.

What should I use to clean my Eljer toilet seat?

Most manufacturers (and the manufacturer of the seats we offer) recommend a light solution of mild soap and water. Products like pine oils, essential oils, chlorine, acid, scouring powders, detergents, disinfectants, bleach, or products in aerosol cans should never be used as they can damage the finish and color of the seat.

Do you have to return a toilet seat?

For hygienic reasons, toilet seats are non-returnable. Please note: Colors are representational ONLY and will differ slightly with each monitor. The colors shown here may not match the actual color of your toilet. If you are unsure what color you need, please order our helpful color-match chips to find the best match prior to choosing your seat.