How do you take a Sony Cybershot camera apart?

By Lexie Tanner 4 years ago

How do you take a Sony Cybershot camera apart?

Step 1 Sony Cyber-Shot DSC-W120 Teardown Turn the camera over and gently push the battery door toward the side. The door is spring-loaded and will flip up. Once the door is open, press the battery release and the battery will eject. The battery will then slide out easily.

How do I fix my Sony Cybershot camera?

Troubleshooting

  1. Turn the power off, eject the battery pack, and reinsert it into the camera.
  2. Turn the power back on and check if the drive part of the lens moves properly.
  3. If the lens still will not open, retract or extend, then reset the camera. [A] Drive part of the lens.

How do I clean my Sony Cybershot lens?

How to clean the Cyber-shot camera.

  1. Blow the dust off on the camera using the blower.
  2. Open the lens cover.
  3. With the lens cover open, blow the dust off on the lens and then wipe the lens gently.
  4. Turn off the camera and make sure the lens cover is closed.
  5. Wipe the entire camera with the cloth.

Why is my Sony Cybershot not turning on?

Turn on the camera. If the camera will still not turn on, attempt to turn on the camera in Playback/Edit mode by moving the mode switch to the Playback/Edit mode or by pressing the Playback button. Switch the unit to Camera mode and attempt to turn on the camera.

Why won’t my Sony Cyber shot turn on?

Screen Does Not Turn On If that fails try resetting the camera. To reset turn off the camera and remove the battery. Hold down the power button for 15 seconds then release. Reinsert the battery pack and power on the camera.

Why is my Sony Cyber Shot camera not working?

You should first replace the batteries and try turning it on again. To reset turn off the camera and remove the battery. Hold down the power button for 15 seconds then release. Reinsert the battery pack and power on the camera.

What do you do when your Sony camera wont turn on?

The camera will not turn on

  1. Check the condition of the battery.
  2. Make sure that the battery terminals are clean.
  3. Make sure to insert the batteries in the correct orientation.
  4. Turn on the camera.
  5. Switch the unit to Camera mode and attempt to turn on the camera.