What is code for tile around fireplace?

By Lexie Tanner 4 years ago

What is code for tile around fireplace?

1. All combustible materials must be 6″+ from the opening of the firebox. The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.

How do you finish the edges of a tile fireplace?

4 Easy Ways to Finish Tile Edges

  1. Caulk the Edge. This is the easiest and most cost-effective solution.
  2. Rail Moldings. Coordinating tile moldings in natural stone and porcelain are usually readily available.
  3. Metal Edges. Metal edges are available in a wide array of styles and finishes.
  4. Create a Bullnose Edge.

Do you need special grout for fireplace?

Installers usually recommend thin set mortar and a narrow grout joint. Daltile recommends using non-sand and non-acid grout for the fireplace.

How do you install backer board around a fireplace?

  1. Measure the fireplace surround with a measuring tape.
  2. Cut the cement board pieces to size.
  3. Spread thinset mortar over the fireplace surround with a notched trowel.
  4. Nail the cement board to the brick fireplace with 1½-inch concrete nails.
  5. Allow the thinset mortar to dry overnight, then tile the fireplace as desired.

What can I use for a fireplace surround?

Material Choices for a Fireplace Surround

  • STEEL. Steel is one of the most popular fireplace surround materials.
  • WOOD. Wood is a less obvious choice for a fireplace surround than steel..
  • CONCRETE.
  • STONE.
  • BRICK.
  • TILE.

Can any tile be used on a fireplace?

What type of tile can be used in a fireplace? If the heat source is more than 20cm away it would be safe to use most types of tiles however it’s advised to use porcelain. This material acts in the same way as fire-resistant bricks by absorbing the heat without transferring it to surrounding areas due to its density.

What grout do you use for a fireplace?

All the BAL adhesives can withstand temperatures of 150-200⁰C but we’d recommend fixing your tiles with the Palace Heat Resistant Adhesive, and then grouting with the BAL Micromax2 as this grout can withstand temperatures up to 100⁰C. If your fireplace is getting hotter than this, a cement-based product is required.