What is the FireWire 800 port used for?

FireWire provides the high-speed connection required to download digital video quickly. FireWire 800 even has the necessary throughput for bandwidth-intensive applications that were not possible over the original FireWire, such as multiple-stream, uncompressed, standard-definition video.

Is FireWire 800 still used?

And Firewire 800 left USB for dead. It’s still in use in many high-end setups, and you can still buy Firewire drives today. But it definitely became a niche product, with even Apple eventually dropping the port from its MacBooks.

Is Thunderbolt the same as FireWire 800?

FireWire provides a data transferring rate of 400 to 800 Mbps. On the other hand, Thunderbolt provides a data transferring rate of 10Gbps. It is around 12 times faster than FireWire 800 version. Therefore, Thunderbolt is faster and performs better than FireWire.

Is FireWire 800 a 9 pin?

9-pin connectors are part of a recent improvement to the IEEE-1394 technology, called FireWire 800 (or IEEE-1394b). The improvement to the specification allows transfer of data at up to twice the speed of the original IEEE-1394 standard. This type of connector is commonly found on Apple® computers.

What can a FireWire port be used for?

Along with USB, Firewire (also called IEEE 1394) is another popular connector for adding peripherals to your computer. Firewire is most often used to connect digital camcorders, external hard drives, and other devices that can benefit from the high transfer rates (up to 480 Mbps) supported by the Firewire connection.

Can I use FireWire to USB?

No, it is not possible to connect a FireWire interface to your computer’s USB port via a FireWire to USB adapter since this connection is not sufficient to run a FireWire audio interface.

When was FireWire 800 discontinued?

FireWire was phased out of Mac hardware between 2008 (when the MacBook Air released without a FireWire port) and 2012 (when the last FireWire-equipped Macs came out).

Do computers still have FireWire ports?

The original FireWire standard has now been overtaken in raw speed by USB 2.0, but because FireWire has been around much longer, it’s in no danger of disappearing. Just connect a device to your PC by using a FireWire cable — run the cable from the device to the FireWire port on your PC, and you’re ready to roll!

Are FireWire and Thunderbolt the same?

FireWire is a serial bus that is used to connects devices to personal computers. On the other hand, Thunderbolt is an interface which connects external peripherals to a computer. FireWire transfers data at a speed of 400 to 800 Mbps whereas on the other hand, Thunderbolt transfers data at a speed of 10 Gbps.

Can you use Thunderbolt to FireWire?

Easily connect your Thunderbolt-equipped Mac to a FireWire device with the Apple Thunderbolt to FireWire Adapter. Small and compact, it connects to the Thunderbolt port on your Mac computer, giving you a FireWire 800 port that supplies up to 7W for bus-powered peripherals like hard drives and audio devices.

Are all FireWire cables the same?

FireWire has two versions, and unlike USB 2.0 and 3.0, they’re not backward compatible. They don’t even look remotely alike, which can lead to some confusion. The older standard, FireWire 400, is a flatter connector with one rounded side, and the faster 800 version resembles a fat USB connector.

How many pins does FireWire 400 have?

6-pin
Two twisted pair sets carry the data in a FireWire 400 cable using a 6-pin configuration. Some smaller FireWire-enabled devices use 4-pin connectors to save space, omitting the two pins used to supply power. FireWire 800 cables use a 9-pin configuration.

How many ports does the firerepeater 800 allow?

FireRepeater 800™ is a 3-port pocket-size Hub that allows you to: Extend FireWire bus length (tested up to 100 meters and ten repeaters in row). Extend your computer’s Firewire-800 ports by two (2). Add or reinforce DC Power Supply capability for your FireWire connection.

What can you do with a FireWire port?

For example, a FireWire® connection can provide an ideal way to connect a scanner to a computer system. Because the transfer rate of the port can reach up to 400 Mbps, the data transfer is relatively fast and also results in excellent quality. A similar approach is taken when uploading captured images from a digital camera to a computer hard drive.

What is the constant rate of FireWire 800?

FireWire 800 is a constant rate – it constantly sends data at 800Mbit/sec. Imagine if someone was driving 50MPH for a few seconds then stopping, then 50MPH and stopping again. Compared to someone who is doing a constant 30MPH, they’ll be much slower reaching the finish line.

Do you need a FireWire 800 adapter for Thunderbolt?

There’s a huge ecosystem of FireWire 800 devices so support for them is still very much required. Apple has dropped FireWire 800 from most of its portable Macs to save space but with Thunderbolt you can simply pick up an adapter and carry on using any FireWire 800 devices you have.