How do I connect my console to ProCurve?

By Lexie Tanner 5 years ago

How do I connect my console to ProCurve?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

How do I reset my HP 1700 24?

Return the switch to its factory default state by completing the following steps:

  1. Remove the power cord from the back of the switch.
  2. Remove all cables from the front-panel ports.
  3. Connect port 1 to port 2 on the front panel using a standard network cable.
  4. Reconnect the power cord to the rear of the switch.

What is HP ProCurve Manager?

HP ProCurve Manager Plus is a Microsoft Windows-based network management platform that enables mapping, configuration and monitoring. HP ProCurve Manager Plus provides security and extensibility for small to large networks with remote sites.

How do I connect to the Aruba console port?

Direct console access Connect the PC or terminal to the switch’s console port using a console cable (JL448A; sold separately). Turn on the terminal or PC’s power and, if using a PC, start the PC terminal program. Press [Enter] two or three times. When prompted to log in specify admin.

How do you connect a console port to a switch?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

How do I reset my HP ProCurve 1700 to factory settings?

can return the switch to its factory default state by doing the following:

  1. Remove the power cord from the back of the switch.
  2. Remove all cables from the front-panel ports.
  3. Connect port 1 to port 2 on the front panel, using a standard network cable.
  4. Reconnect the power cord to the rear of the switch.

What is HP Intelligent Management Center?

Hewlett Packard Enterprise’s Intelligent Management Center (IMC) is a comprehensive management platform built from the ground up to support fault, configuration, accounting, performance, and security. With IMC, IT administrators are able to conduct business with greater efficiency.

What is HP NNMi?

Network Node Manager i (NNMi) is a program that helps a network administrator view and manage the conditions in a computer network. NNMi is part of the OpenView suite of enterprise system management applications from HPE (Hewlett-Packard Enterprise), the company’s business products and services division.