How do I know what size ball I need for my trailer?

To determine the proper size of ball that you need, look at the coupler on the tongue of your trailer. Most couplers have the proper ball size and towing capacity stamped into them. The most common sizes of trailer balls are 1 7/8″, 2″ and 2 5/16″.

What kind of hitch do I need for a motorcycle trailer?

Light-Duty Receiver Hitches (Commonly known as Class 1) Light-duty receiver hitches are designed typically for towing bike racks and cargo carriers. This style of hitch can also be used to tow smaller utility or enclosed trailers, and motorcycles as well. The maximum gross trailer weight should be less than 2,000 lbs.

What are the different size balls for towing?

Are there different size tow balls? Yes, there are four different size tow balls commonly used for towing: 1-7/8-inch, 2-inch, 2-5/16-inch and 3-inch diameter. One size will not fit all trailers. 1-7/8-inch tow balls are rated as high as 3,500 pounds and are used for towing small, light-duty trailers.

Are motorcycle hitch carriers safe?

It’s all good news – as long as you stay within the weight limits of your vehicle and hitch, motorcycle carriers will not cause any undue wear and tear on your vehicle. If you’re under your vehicle’s maximum weight rating, then rest assured.

How do I measure my ball size?

One easy way to measure the “size” of a ball is how far it is from side to side. Your tennis ball example is a good one: a typical tennis ball is about 2.5 inches form side to side. And one way to measure that size is to place the ball on a table in the sunlight when the sun is nearly overhead — close to noon.

How do you measure a towball?

If you have a towbar and don’t know how big your towball is, check it out! All towballs have their ball size stamped into the top of the ball. As you might know, NZ’s most common tow ball size is 1 7/8” (47.625mm).

What are the different hitch sizes?

There are four standard trailer hitch sizes: 1-1/4″, 2″, 2-1/2″ and 3″. The hitch size refers to the inside dimensions of the hitch receiver. Using a standard hitch size approach allows for more versatile towing options.

Are motorbike carriers legal?

In NSW, it’s illegal to drive a car with a rear bike rack installed and no bike on it. Ultimately, many bike racks can’t be fitted safely in the carpark or on the side of the road.

What is the size of a ball hitch?

The standard ball size for a trailer hitch is 2 inches in diameter. Most trailers have a 2-inch coupler, making the 2-inch ball the standard size. However, the ball size may be different depending on the size of the trailer. The other common ball sizes include 1-7/8 inches and 2-5/16 inches.

What is the smallest diameter hitch ball?

The smallest trailer hitch ball is the 1-7/8-inch ball diameter. This ball size has a weight capacity of up to 2,000 or 3,500 pounds, depending on the individual ball. It has a shank diameter or 3/4 inches or 1 inch. The 1-7/8-inch ball is common for light-duty towing.

What is a bicycle trailer?

A bicycle trailer is a motorless wheeled frame with a hitch system for transporting cargo by bicycle.

What is hitch mount bike rack?

A hitch-mounted bike rack is a type of bike rack that slides into the receiver of a trailer hitch on a car or truck. This type of rack has some advantages over roof- and trunk-mounted bike racks: