How do I wire a 4 port switch?

For each device, insert one end of an Ethernet cable into the port in the device and insert the other end into one of the Ethernet ports on the switch. 3. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip).

Why do routers have 4 ports?

LAN ports: A home router usually has four LAN ports, meaning that, straight out of the box, it can host a network of up to four wired networking devices. If you want to have a larger network, you will need to resort to a switch (or a hub), which adds more LAN ports to the router.

What is a 4 port modem?

The 4-Port ADSL 2/2+ Modem Router, model TDM-C504, provides a modem for Internet access, a router for multiple Internet connections, and a 4-port switch to network computers and other devices. This combination modem router supports Internet service providers with ADSL 2 and ADSL 2+ networks.

Why do modems have multiple Ethernet ports?

The two ethernet ports are not to be used by separate devices, but are bridged as one connection for faster then 1Gbps connection. This is called LINK AGGREGATION SETUP or LAG.

Can I increase the number of Ethernet ports on my router?

You need to get yourself a switch which will enable you to add more ports to your network so you can add multiple Ethernet devices to it. Using a single Category 5e Ethernet cable, you can connect your router to a switch, giving you more Ethernet ports to play with, depending on the size of the switch.

Are all the ports on a network switch the same?

Because unmanaged switches are so simple, models from different manufacturers all perform about the same. A good five-port switch, such as this one from TP-Link—with one port to connect to an Ethernet port on your router, and four to connect to your devices—should cost $20 or less.

Does it matter where I plug in my ethernet cable?

Method 1 of 3: Ethernet cables, also known as RJ-45, CAT5, or CAT6 cables, have a square plug with a clip on each end. You’ll use an Ethernet cable to connect your computer to your router. The cable connecting your modem and your router is an Ethernet cable, but don’t use that one, as it is important where it is.