How do you read ping output?
How to Read Ping Test Results
- Type “ping” followed by a space and an IP address, such as 75.186.
- Read the first line to view the server’s host name.
- Read the following four lines to view the response time from the server.
- Read the “Ping statistics” section to see the total numbers for the ping process.
What does the output of ping mean?
Ping is a computer network administration software utility used to test the reachability of a host on an Internet Protocol (IP) network. Ping measures the round-trip time for messages sent from the originating host to a destination computer that are echoed back to the source.
What is TTL in ping?
TTL means “time to live”. It is a value on an ICMP packet that prevents that packet from propagating back and forth between hosts ad infinitum. Each router that touches the packet decrements the TTL.
What is a good ping result?
In gaming, any amounts below a ping of 20 ms are considered exceptional and “low ping,” amounts between 50 ms and 100 ms range from very good to average, while a ping of 150 ms or more is less desirable and deemed “high ping.”
What are the results of ping test?
When you complete a ping test successfully, there is a reply for each packet of data that you send and respectively receive after that. However, the fact that the ping test returned results indicates that your computer is able to connect to the domain or IP address that you are testing.
What does the ping number mean?
Latency (or Ping) # Latency (or Ping) is the reaction time of your connection-how quickly your device gets a response after you’ve sent out a request. A low latency (fast ping) means a more responsive connection, especially in applications where timing is everything (like video games).
What is good TTL in ping?
The TCP/IP specification recommends setting the TTL field for IP packets to 64, but many systems use smaller values (4.3BSD uses 30, 4.2BSD used 15). And to quote RFC 1700: The current recommended default time to live (TTL) for the Internet Protocol (IP) is 64.
What happens when you ping a device?
The “ping”—a data packet—is sent out to an IP address. Transmitted over the network’s switch and router, the data packet arrives at the device with the specified address. If the ping doesn’t receive a response, the request times out, and the device that sent the ping gets an error message or notification of data loss.
How to read and understand the Ping results?
Ping Results Explained: 1 Reply from: By default, windows will send four ping messages (one on each line) and then shows you the outcome of each of the four messages. 2 Bytes: Each ping message request is 32 bytes in size. 3 Time: This shows the round trip amount of time in milliseconds (8ms = 0.008seconds).
What does Ping do when I give it an IP address?
When I add the “-a” switch to ping and give it an IP address, ping does what’s called a “reverse DNS lookup” and displays the domain name that is assigned to that IP address. This is very handy at times, since many IP addresses are also assigned fairly descriptive domain names. The results of a reverse DNS lookup can have three types of responses:
What does round trip and TTL mean on Ping?
Round trip is the time from when the ping message was sent and how long it took before the reply came back. TTL (Time-to-Live) : The TTL value represents the maximum number of IP routers that the packet can go through before being thrown away.
What does it mean when a remote router does not Ping?
A remote router has reported that it does not have a route to the destination you are pinging. If the error messages just says “Destination Host Unreachable” then there is no route from your PC so the packet was not sent.