How do you use TV speakers on Onkyo receiver?

By Lexie Tanner 5 years ago

How do you use TV speakers on Onkyo receiver?

Plug the red and white RCA cables into the “Audio Out” ports on the back of the television. However, if you are using an HD TV, connect a HDMI cable into an available HDMI port on the TV set. Connect the other end of the RCA cables into the “Audio In” ports on the back of the Onkyo receiver.

What is the best listening mode for Onkyo?

All Channel Stereo can be used on 5.1 and 2.0 Sources, but I prefer Dolby Digital or THX Cinema for 5.1 Sources as there is Discrete Information for each Channel with 5.1 Sources. However, whatever sounds best to you is fine. Some enjoy having all Channels playing at a high volume like with All Channel Stereo.

Why is my Onkyo surround sound not working?

Make sure the speakers are configured correctly. When the T-D (Theater-Dimensional), Stereo or Mono listening mode is selected, the surround speakers produce no sound. Depending on the source and current listening mode, not much sound may be produced by the surround speakers. Try selecting another listening mode.

What is front A and front B speakers?

The Speaker A output is used for the speakers in the main room while the Speaker B output is for a second pair of speakers in another room (garage or patio, etc.). Make sure that speakers are properly hooked up to the Front B speaker port of the receiver.

How do I get my TV to play sound through my receiver?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

How do I connect my Onkyo receiver to my TV?

Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).

How do you use Zone 2 speakers?

What is the zone 2 feature and how to use it?

  1. Turn on the receiver and play the source that you want to listen to in zone 2.
  2. Turn on the amplifier in zone 2.
  3. Press the ZONE button to switch the remote to zone 2.
  4. Press the.
  5. Press one of the following buttons to select the source that you want to listen to:

What is the best sound mode for surround sound?

If you get a choice of either Dolby Digital surround or DTS, we recommend using DTS. This surround format for either 5 or 7 channels is currently only available on Blu-ray discs. It is the same quality as CD. As such, it offers best surround audio quality currently available.