How long is a 10 seater table?
How long is a 10 seater table?
Dining Table Size Guide
| Size of Dining Table | Length | Width |
|---|---|---|
| 4 seater dining table | 75cm – 90cm | 75cm – 90cm |
| 6 seater dining table | 118cm – 140cm | 75cm – 90cm |
| 8 seater dining table | 150cm – 220cm | 75cm – 90cm |
| 10 seater dining table | 180cm – 280cm | 90cm – 100cm |
What size table seats 10 comfortably?
108″
A 70″ rectangular dining table can seat between 4-8 people comfortably. An 84″ rectangular dining table can seat up to 8 people comfortably. A 90″ rectangular dining table can seat up to 8 people comfortably. A 108″ rectangular dining table can seat up to 10 people comfortably.
How long is a 12 person table?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How long is a 10 seater rectangular table?
Rectangle dining table size for 10. It is possible to fit 10 seats on a rectangle table size of 8–10 feet x 3’6″–4’6″ (244–305cm x 110–140cm). To seat 10, five side-by-side, you should aim for a minimum length of 10 feet and width of 2 feet 6 inches (305 x 76cm).
What size tablecloth for a rectangular table that seats 10?
Square and Rectangle Tablecloths
| Standard Table Sizes: | For Lap Length, you need: |
|---|---|
| 6′ Rectangular Table (seats 6-8) | 60″ x 120″ cloth |
| 8′ Rectangular Table (seats 8-10) | 60″ x 120″ cloth |
| 36″ Square Table (seats 4) | 72″ square cloth |
| 48″ Square Table (seats 4-6) | 72″ square cloth |
How long is a rectangle table that seats 10?
96 inches long
To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How long is a rectangular table that seats 12?
A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.
How long does a dining room table need to be to seat 10?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
What is the standard size of a 8 seater dining table?
Dining table sizes for eight can range from 72 to 96 inches long by 36 to 43 inches wide (6–8ft x 3ft–3’6″; 183–244cm x 91–110cm), with the lower measurements also a comfortable fit for six seats and the higher measurements suitable to squeeze 10 people.
What size dining room table will seat 10 people?
The minimum square, eight-seater dining table size is around 6ft (183cm), although 7ft (214cm) is the ideal size; both sizes, however, can squeeze up to 10 seats. You could also squeeze up to 12 people around a 7ft table; for a larger square dining table size, you might a rectangular dining table so guests aren’t so far from each other.
What size rectangular dining table seats 10 people?
Table Size. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long . Use the rectangular table measurements for oval tables. A round table for eight people must be 192 inches in circumference — 24 inches times 8 — or 62 inches in diameter (circumference divided by pi, or 3.14, equals diameter).
What size dining table for 10×12 room?
Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.
What size is a 10 person Round Table?
Use our handy size chart to figure out what size you need! Below you’ll see sizes for standard Round Tables and Rectangular Tables. Typical size for 10-person table is 72″ Round Table. 1′ = 12″ / 1 foot = 12 inches.