How much boost can a stock Ford 460 handle?

it is well known that the BBF 429/460 based blocks can with hold 1200 hp without any issues…

How much HP can you get out of a Ford 460?

But if you want to talk cast-iron overkill, perhaps we should speak of the Ford 429/460. Massive 3-inch main bearings and hefty iron heads combined at one time in the smog era to put out a measly 206 hp. Thank god those days are over.

Can you put a turbo on a 460 Ford?

there is no turbo you are going to find in the junkyard that is going to be big enough to support a 460. most turbos are designed to work well on engines less than 3 litres.

What can 460 be stroked to?

Auto Machine transform a 460 into a stump-pulling 501ci stroker with over 500 lb-ft of torque from 2,300 to 5,300 rpm. See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches.

How far can you stroke a Ford 460?

3.85”
The 429 has a stroke of 3.59” and the 460 has a stroke of 3.85”.

What is a 460 stroker?

460 cubic inches. This is a stock style setup, featuring a 3.850″ stroke and bore sizes ranging from 4.390″ to 4.440″. Whether the kit is intended for stock replacement or racing, various levels of compression will allow for improved performance with emphasis on top-end power and high RPM. 502/514 cubic inches.

How many miles will a Ford 460 last?

the 460 won’t last as long as a 4.0 that much is true. However a 460 can last past 125k. Just make sure to keep it tuned regurally and use good oil. I’ve seen 454’s with over 150k still going strong.

How much does a Ford 460 engine cost?

In order to keep costs down FordMuscle techs went in search of a low mileage or well-maintained stock 460 engine. Our goal was to source a standard two-bolt main 460 bottom end for no more than $350, but more importantly find one which required nothing more than a bearing and ring job.

Can You rebuild a Ford 460 bottom end?

Our BBF 460 project kicks off with a budget conscious bottom-end rebuild. Only the essentials are replaced, and machine shop work is limited. A cheap motor may not be the least expensive to rebuild. Look for donors likely to have a low abuse factor.

What kind of Stroker does a Ford 460 have?

Every enthusiast seems to have a passion for a particular brand of manufacturer. Off-the-shelf stroker kits are commonly available for the 460 engine. This kit consisted of a 4.500” stroke forged micro-polished crankshaft, forged pistons with 35 cc dish, SFI approved damper, and 6.700” H-beam connecting rods.

What are the casting numbers for a Ford 460 engine?

Just as with any other project, in order to make big power from a 460 engine you need to start with a good block. The most common production block casting numbers are C8VE-B, C9VE-B, D0VE-A, D1VE, and D9TE-AB. The D9TE-AB block is considered a late-style block, being produced from 1979 until 1997.