What does E8 mean on Canon printer?

platen waste-ink absorber
Check the printer’s display for code E8 if you installed the ink cartridge properly and you cannot print. Code E8 indicates the platen waste-ink absorber is full. To clear an E8 error, open the printer’s protective cover until the print head moves all the way to the left.

Why does my washing machine say E08?

A common error code on most Hoover washing machines is E08 or Error 8 this usually indicates a problem with the motor, and the most common reason will be that the carbon brushes have worn down and not completing a circuit through the motor, replacement is easy and should be carried out with the machine disconnected …

How do I reset my Hoover washing machine?

To reset the washing machine:

Press POWER to turn off the washing machine.
Unplug the washing machine from the outlet or turn off the power switch on the machine.
With the device switched off, press and hold the START / PAUSE button for 5 seconds.
Reconnect the washing machine or turn it back on.

How do I fix my Canon MP287 error 5B00?

On Canon iP2770, error 5B00 mean, the ink absorber is almost full. The solution is to doreset. On Canon MP287, error E08 mean, the ink absorber is almost full. The solution is to do reset.

What does F08 mean on a Hotpoint washer?

If an Indesit or Hotpoint washing machine is flashing an LED 8 times, or is displaying the error code F08, this usually indicates the following. “Heater relay can’t be activated” or “heater relay stuck”.

What does the canon E08 error message mean?

What is the Canon E08 Error Message? The Canon E08 error message indicates that the “Ink absorber is almost full” in the bottom of your printer. To bypass this message you can simply press the black or colour button of your printer which will allow you to continue printing. However this message will continue to appear until

Why is there an error message on my Canon printer?

The Canon E08 error message indicates that the “Ink absorber is almost full” in the bottom of your printer. To bypass this message you can simply press the black or colour button of your printer which will allow you to continue printing.

What do I do if my printer says E08?

E08. Replace the ink absorber, and reset the ink absorber counter. Pressing the Stop/Reset button will exit the error, and enable printing without replacing the ink absorber. However, when the ink absorber becomes full, no further printing can be performed unless the applicable ink absorber is replaced.

Is there a warranty on a canon mp287 printer?

There are simple error as out of paper, paper jammed to complex problems that need attention of authorized service centerwhen using your Canon MP287 printer. After you bought it, you have 1 year warranty or can extend up to 3 years (due to promos) of free service and charge, so you have a peace of mind.