What is engine code po446?

P0446 is a diagnostic trouble code (DTC) for “Evaporative Emission Control System Vent Control Circuit Malfunction”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

Where is the EVAP sensor?

On most domestic and foreign vehicles sold in the US, the EVAP emissions canister is located next to the fuel cell. It is shaped in a rectangular or spherical design and has three vapor lines attached to it. One line attaches to the fuel cell, one to the EVAP purge solenoid and one to the EVAP vent solenoid.

What causes incorrect purge flow?

These are a few possible causes that may occur: A line or canister in the EVAP system is broken or damaged. The purge solenoid is faulty. There is an open or short in the voltage feed circuit to the purge solenoid.

Can I drive with a bad canister purge solenoid?

While you can still drive your car with a bad purge valve, you will only expose it to further damage not only to the EVAP system, but as well as to the other parts in your vehicle. The more you drive the vehicle with a bad purge valve, the more you will harm other parts. It is necessary to fix the problem eventually.

Is EVAP code serious?

While it is safe to drive with an EVAP leak, you should not drive your vehicle for long while you do have a leak. If your Check Engine Light comes on, check to make sure the gas cap on your vehicle is securely fastened. If the light is still on, take it to a mechanic so the leak can be fixed.

How much does it cost to replace EVAP system?

EVAP Leak Repair Cost: Everything You Need to Know. When your check engine light goes off it could be for a number of reasons and one of them is relating to an EVAP leak in your fuel evaporative system. The cost of repairing your EVAP system can range from $200 to as much as $600 or more.