What manual transmission came in a 1991 Chevy 1500?

What manual transmission came in a 1991 Chevy 1500?

The Muncie SM465 is a heavy-duty, four-speed manual transmission built by General Motors for use in light and medium duty trucks from 1968 to 1991 at the factory in Muncie, Indiana. The SM465 can be found in Chevrolet and GMC full-size trucks, Blazers, Suburbans, among other models.

What transmission is in my 1991 Chevy truck?

1991 Chevy C/K 1500 Pickup A four-speed automatic transmission with overdrive was standard across all models.

What manual transmission is in a 1992 Chevy 1500?

HM290 Manual Transmission for GM 1988-1992 Van 1500 And 2500 RWD 5 Speed.

What motor is in a 1991 GMC Sierra?

Used 1991 GMC Sierra 1500 Specs & Features

Base engine size 4.3 l
Base engine type Gas
Cylinders V6
Horsepower 150 hp @ 4000 rpm

How do I know if I have a NV4500?

The assembly number will tell us what parts your particular transmission has which is important given the number of NV4500 variations there is. A stamped metal ID tag is secured to the transmission using two of the left PTO cover bolts. There is also an ID decal on the top cover.

What transmission is in a 90 Chevy 1500?

The 1990 Chevrolet C/K 1500 truck is available with a regular cab or extended cab, which provides extra seating. The 1990 Chevy truck comes in two- or four-wheel drive and has either a six-and-a-half foot bed or an 8-foot bed. The standard transmission for nearly every trim is a four-speed automatic with overdrive.

What transmission is in a 1992 Chevy 1500 2wd?

For Automatic Transmission: 4L60….AF6

Notes: This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer
Capacity: 4 speed 4L60 Total Fill 11.2 quarts 5 quarts Initial Fill

What manual transmission is in a 1993 Chevy 1500?

HM290 Manual Transmission for GM 93-95 1500 And 2500 4×4 5 Speed Zumbrota Drivetrain.

How much horsepower does a 1991 Chevy 350 have?

Chevy 350 Crate Engines The base version of this engine makes 195 horsepower and features an 8.5 compression ratio. These engines are available in 2-bolt and 4-bolt versions; those intended for cars built after 1987 have an enhanced hydraulic roller lifter camshaft for better performance.

What is the value of a 1991 Chevy pickup?

1991 Chevrolet C/K 1500 Series trade-in prices range from $272 – $2,568.

What kind of drive does a GMC Sierra have?

Before deciding, be sure to try all three. GMC’s Sierra and the nearly identical Chevrolet C/Ks had been redone as early 1988 models, in three series: 1500 (1/2 ton), 2500 (3/4 ton), and 3500 (1-ton). C pickups were 2-wheel drive; K indicated Insta-Trac part-time 4WD.

What kind of transmission does a GMC 3 speed have?

Fully synchronized with 36 tooth synchro rings. This is the only GM 3 speed with the same bearing front and rear. This transmission is found in performance applications. Cast iron, top-loaded case with side shift linkage. Fully synchronized with 36 tooth synchro rings. Same unit as Ford RAT except for a GM bolt pattern to the bell housing.

What kind of engine did GMC Sierra have in 1996?

1996 Sierra Pickup Vortec engines arrived in ’96, delivering more power. The new 4.3-liter V6 gained 40 horsepower (reaching 200). The 5.0-liter V8 gained 45 horsepower, the 5.7-liter added 50 horses, and the 7.4-liter V8 gained 60 horsepower (now 290).

What kind of engine did Chevy pickup have in 1991?

Two different engines were made available for the largest size pickup in 1991. The 5.7-liter, 255-hp V-8 or the 7.4-liter, 290-hp V-8. A five-speed manual transmission with overdrive was offered standard on all models, but a four-speed automatic transmission was an available option.