Why does my Kenmore washer says Sud?

Why does my Kenmore washer says Sud?

If “Sud” is displayed a potential suds lock is detected. This may signify a bad pump, an extra heavy load, excessive detergent, or excessive suds. If too much detergent was used, run the unit through a Rinse/ Spin cycle then a Normal cycle without adding any detergent.

How do you fix a Sud washing machine?

The washer has detected too many soap suds; it should pause automatically and wait for the suds to dissipate. Making sure you are using a high-efficiency detergent, not using too much detergent, removing detergent residue from the washer, and cleaning the drain pump filter should resolve the issue.

How do I fix the Sud error on my Kenmore Elite washer?

SUD : The Sud error code is used to indicate there are too many suds for the washer to remove. This is often caused by too much detergent being used or non HE detergent being used in an HE machine. Run the machine through a Rinse/Spin cold water cycle then a Normal cycle without adding any additional soap.

How do you fix a SD on a washing machine?

Simply put, too much detergent was used and an excessive amount of suds or foam was produced. Adding an additional rinse cycle without adding any more detergent might fix this problem. Sometimes the machine will automatically detects this problem and add a pause and additional rinse cycle in order to break up the suds.

How do I fix the Sud error on my Kenmore washer?

How do you fix too many suds on a washing machine?

If you have it on hand in your home, adding in a half cup white vinegar to the washer or in the detergent dispenser can calm the bubbles down. You should notice it working almost right away. You may also want to add vinegar when you rinse the clothing on a rinse cycle to ensure that the clothing comes out clean.

How do I fix the Sud error on my Maytag washer?

This type of liquid chlorine bleach contains a thickening agent that may create excess suds in washers. If this is the case, run the washer empty, using regular liquid bleach products, or clean with affresh® washer cleaner before running another load. affresh® cleaners are available at many retailers.

How do I get the water out of my Kenmore Elite washer?

Turn the pump filter cover counter-clockwise by hand and remove. Place a bucket or pan underneath it since you will get the water spilling out of there. Removing the filter should remove all water from your washer.