How do I program my AT remote to my LG TV?

By Lexie Tanner 4 years ago

How do I program my AT remote to my LG TV?

Here’s all you need to do:

  1. With your TV on, use your U-verse TV remote and press Menu.
  2. Select Help > Information > Remote Control Setup.
  3. Next, select your remote control from the TV onscreen list. Refer to your specific remote for TV/device setup options.
  4. Select Top Ten Brand Setup, Automatic Code, or Manual Setup.

How do I program my RCA universal remote to my LG TV?

Follow these easy steps:

  1. Manually turn on your TV.
  2. Aim your remote at the TV panel and press and hold the TV button.
  3. Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
  4. Press the Play or the Slow button on your remote for five seconds.

How do I get my volume to work on my AT Remote?

Sound or volume issues

  1. Check the volume level and mute settings on your TV and any audio-visual (A/V) receivers you may have.
  2. Check audio settings on your device using your remote: Press the Home button, then Settings > System > Remote & Devices > Program Your Remote > Advanced Remote Program > Switch Volume Control.

How do I turn up the volume on my AT cable box?

Adjust if necessary.

  1. To adjust the volume on the U-verse receiver press the AT button on the top end of the U-verse remote control.
  2. Pressing the +/ – VOL key on the U-verse remote control, adjust volume to 25.
  3. A volume indicator appears on the screen. The volume indicator disappears after a few seconds.

How do I program a RCA universal remote to my TV without codes?

If your RCA universal remote does not have a Code Search button

  1. Power on the equipment you want to control.
  2. Press and hold the button on the universal remote that matches the device you’re pairing (e.g. if it’s a DVD player, press the DVD button).

How do I get the volume to work on my directv remote?

Highlight the “Remote” selection and press “OK.” Choose the “Program Remote” option and follow the on-screen instructions to program your remote to work with your TV set. When finished, the volume up/down buttons on the remote will work to control your TV’s volume.

How do I get my directv remote to control my TV volume?

Program remote for a Standard DVR or SD receiver

  1. Press MENU on your remote.
  2. Select Parental Favs & Setup > System Setup > Remote or Remote Control > Program Remote.
  3. Choose the device (TV, audio, DVD) you wish to program.
  4. Follow the on-screen prompts to complete the programming.

https://www.youtube.com/watch?v=HrFv25xr2gU