How do you read Samsung fridge error codes?

How do you read Samsung fridge error codes?

Please press and hold the top left and top right buttons on your display simultaneously for 8-10 seconds until the screen flashes and a chime sounds.

  1. If an error code is present, it will be displayed on your fridge’s screen.
  2. If more than one error is present, the display will cycle through the codes.

How do I clear the 1 E error on my Samsung refrigerator?

How do I reset the 1E error code on my Samsung refrigerator after a power failure? PRESS and HOLD the ENERGY SAVER button and the LIGHTING button at the same time for 10 – 15 seconds. After pressing the 2 buttons on the refrigerators display, your Samsung refrigerator will reset and resume normal operation.

Are there problems with Samsung refrigerators?

Thousands of Samsung refrigerator owners are now part of a class action lawsuit. They claim the appliances are defective, blaming the ice makers. The suit says the problems result in leaking and slush, over-freezing in the ice compartment, water leakage and fan noise. Sproul has had those issues since 2017.

Is there a reset button on Samsung refrigerator?

Samsung fridges that don’t have a dedicated reset button can usually be reset using a standard key combination. Press and hold the Power Cool and Power Freeze buttons simultaneously for five seconds. If the reset has worked, you’ll hear a chime, and the fridge will start back up with the default settings.

What do the Samsung refrigerator codes mean?

The Samsung fridge OF OF code means the refrigerator is in Display Mode, Demo Mode, or Showroom Mode. These modes are meant for displaying the appliance in a store or showroom, such as on the showroom floor at Home Depot, Lowe’s, Best Buy, etc.

What does 1E mean on a Samsung refrigerator?

the refrigerator lost power
The 1E error code means the refrigerator lost power. This usually occurs from a power outage. When the 1E is displayed, the display panel will lose all functionality and the refrigerator will not dispense water or ice.

How do you reset a Samsung refrigerator?

Resetting your refrigerator is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of it (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

What to do if your Samsung refrigerator is not working?

Unplug the refrigerator or turn off power at the circuit breaker, disconnect and reconnect the wire harness above the door, and then restore power to the fridge. If the code returns, visit our Support Center to request service.

Where are the cooling off buttons on a Samsung refrigerator?

Locate the top two buttons on the left side of the panel. On newer models, the top button on the right side of the panel is also necessary. However, we recommend trying it with only 2 buttons first as you’re less likely to be in Cooling Off Mode accidentally on models which require 3 buttons.

Why does my Samsung refrigerator have an error code of 76C?

76C or blinking Autofill indicator Water is detected in the Autofill compartment. 85C This error code that appears on Family Hub is triggered by low voltage detected on the power source.

Why is there an AP code on my Samsung refrigerator?

The list of error codes will display. The refrigerator will display AP when it is acting as an access point. This is so that the fridge can be set up for Wi-Fi features such as SmartThings. You usually make this code appear by pressing and holding the button indicated during SmartThings setup.