How many fuse boxes does a Chevy HHR have?

The 2010 Chevrolet HHR has two fuse boxes; the underhood fuse box and fuses located on the Body Control Module which is located under the dash on the right side of the center console.

How do I reset my HHR computer?

You can reset the ECM on the Chevy HHR by pulling the 50 amp fuse near the battery for about 10 minutes. It’s much easier than pulling the battery terminal. You can reset the ECM by pulling the 50 amp fuse near the battery for about 10 minutes.

Where are the fuse boxes in an HHR?

The floor console fuse block is located on the passenger side of the floor console behind the forward panel. The panel has four clips, one in each corner. Pull the panel to disconnect the four clips, and access the fuses.

Where is the fuse box located on a HHR?

Fuse Box Location It is located on the driver side of the engine compartment, under the cover.

How do you open a fuse panel?

To remove the fuse box lid, put your finger in the notch on the lid, pull it toward you, and take it out of its hinges. The fuses are located in five fuse boxes. The interior fuse boxes are located under the dashboard on the driver’s and passenger’s side.

How do you reset the code on a Chevy HHR?

To reset the Chevy HHR radio You will need to turn the ignition to the on position then turn on the radio. Once it is on hold down the MIN button on the radio until it beeps. You will now see the 0000 display on the radio face.

How do you reset the check engine light on a Chevy HHR?

Start the engine of the HHR to ensure the engine light is no longer displayed on the instrument panel. Turn the ignition of the HHR off if the light is out, and unplug the scanner. If the light did not go out, repeat the process. If the light remains on, chances are the code is a “hard” code.

When to check for a blown fuse on a HHR?

Electrical components such as your map light, radio, heated seats, high beams, power windows all have fuses and if they suddenly stop working, chances are you have a fuse that has blown out. If your HHR is experiencing electrical problems, you should always check the fuses first, because they are relatively easy to check and cheap to change.

Where is the fuse located on a Dodge Ram?

– The Left Rear Access Panel Door Relay (Panel Van Only), and the Right Rear Access Panel Door Relay (Panel Van Only) are located in the rear of the vehicle behind the right rear quarter trim panel. – A Rear Power Plug mini fuse (Panel Van Only) is located near the battery in the rear of the vehicle.

How do you repair an interior fuse box?

1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5. Test Component – Secure the cover and test component 6. More Info.