What is the admin password for Buffalo NAS?

By Lexie Tanner 3 years ago

What is the admin password for Buffalo NAS?

The default username and password are “admin” and “password”.

How do I reset my Buffalo NAS password?

Open the front panel and look under the left corner of the LCD screen for the red Init button. Press and hold the red button for 10 seconds. The device will start beeping. The password and IP address has been changed to default.

How do I access the Buffalo NAS drive?

Mapping a Drive to a Buffalo NAS in Windows

  1. Open NAS Navigator.
  2. Right-click on the NAS.
  3. Select “Browse Shares” from the pop-up menu.
  4. Right-click on the shared folder you want to map to a drive letter.
  5. Select “Map network drive…” from the pop-up menu.
  6. Click on the drop-down menu to change the drive letter if desired.

How do I reset my Buffalo Link Station?

The LinkStation will be restored to its factory default settings….Initializing from Settings

  1. In Settings, navigate to [System] – [Restore/Erase].
  2. Click [Restore LinkStation].
  3. The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].

How do I reset my Buffalo LinkStation IP address?

More videos on YouTube

  1. To initialize the settings on the LinkStation using the function button, start by turning off the LinkStation.
  2. While holding down the function button, turn the LinkStation on.
  3. Press the function button again while the LED is flashing.
  4. Initialization will take 5 to 10 minutes.

How do I reset my Buffalo NAS without losing data?

To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.

How do I access files in Buffalo TeraStation?

Log in to Settings for the TeraStation. You can access Settings by either entering the TeraStation’s IP address into a web browser window or by using NAS Navigator. Navigate to the “File Sharing” tab and click the Folder Setup widget button to view all shared folders.

How do I get Buffalo NAS on Windows 10?

Adding Windows credentials of your NAS on Windows 10 or Windows Server 2019

  1. Click Control Panel in “Windows System Tools”
  2. In the Control Panel, select “Category” and click “User Account”.
  3. Click “Manage Windows Credentials”
  4. In the Credential Manager, click “Windows Credentials” icon, then click “Add Windows Credentials”

How do I reset my Buffalo NAS?

How To Manually Factory Reset A Buffalo NAS

  1. Turn off the LinkStation.
  2. Turn the LinkStation on with holding down the function button. The function LED will flash blue or white.
  3. Press the function button again while the LED is flashing. The status LED will flash blue or white.